NEW – KTM 50 JUDD RACING EXTENDED SWING ARM CHAIN GUIDE SKEG – In Judd Racing Orange & EHR Blue
NB: This KTM 50 Chain Guide Skeg ONLY fits the Judd Racing Extended Swing Arm
FITTING INSTRUCTIONS:
1. Remove existing chain guide block supporting bracket
2. Temporarily install the x 2 long chain block bolts through the JUDDESA chain guard as shown in photo 1.
Photo 1
3. Insert bolts through bracket on swing arm as shown in photo 2 and mark position of rear hole as shown in photo 3 & 4.
Photo 2
Photo 3
Photo 4
4. Centre-punch centre of hole as photo 5
Photo 5
5. Remove rear wheel and drill a 6mm hole through swing arm as photo 6. NOTE – Ensure hole is straight and square through swing arm
Photo 6
6. Fit JUDDESA chain guide to swing arm using the bolts provided and refit the chain guide block in position to suit rear sprocket fitted as photos 7 & 8.
Photo 7
Photo 8
Judd Racing KTM 